Shark Iron S3901WM User Manual

 
English  
11. DO NOT unplug by pulling on  
power cord. To unplug, grasp the  
plug not the power cord. Do not  
use extension cords or outlets  
with inadequate current carrying  
capacity.  
21. Extreme caution should be  
exercised when using this  
appliance to clean stairs.  
22. Never use steam mop without  
micro-fiber cleaning pad attached.  
23. Keep your work area well lit.  
12. DO NOT put any objects into  
openings. Do not use with any  
opening that is blocked.  
24. Store steam mop indoors in a cool,  
dry place.  
13. DO NOT put hands or feet under  
25. To avoid circuit overload, do not  
operate another appliance on the  
same socket (circuit) as the steam  
cleaner.  
the steam mop. Unit gets very hot.  
14. In mop mode use ONLY on flat,  
horizontal surfaces. Do not use on  
walls, counters or windows.  
26. If an extension cord is absolutely  
necessary, an extension cord rated  
a minimum of 15 ampere, 14 gage  
cord should be used. Cords rated  
for less amperage may overheat.  
Care should be taken to arrange  
cord so that it cannot be pulled or  
tripped over.  
15. DO NOT use on leather, wax  
polished furniture or floors,  
synthetic fabrics, velvet or other  
delicate, steam sensitive materials.  
16. DO NOT add cleaning solutions,  
scented perfumes, oils or any other  
chemicals to the water used in this  
appliance as this may damage the  
unit or make it unsafe for use. If  
you live in a hard water area, we  
recommend using distilled water in  
your steam mop.  
27 Always unplug and allow the steam  
mop to cool before removing or  
changing mop heads.  
WARNING: Your steam mop  
is designed to clean hard floor  
surfaces that will withstand high  
heat. Do not use on unsealed wood  
or unglazed ceramic floors. On  
surfaces that have been treated  
with wax or some no wax floors,  
the sheen may be removed by the  
heat and steam action. It is always  
recommended to test an isolated  
area of the surface to be cleaned  
before proceeding. We also  
17. When in use, NEVER turn the  
appliance over or on its side.  
NEVER DIRECT STEAM TOWARDS  
PEOPLE, ANIMALS OR PLANTS.  
18. NEVER LEAVE THE STEAM MOP  
IN ONE SPOT ON ANY SURFACE  
FOR ANY PERIOD OF TIME WHEN  
MICRO-FIBER PAD IS ATTACHED  
AS THIS WILL DAMAGE YOUR  
FLOORS.  
recommend that you check the use  
and care instructions from the floor  
manufacturer.  
19. Carefully remove the micro-fiber  
cleaning pad immediately after you  
have unplugged and allowed the  
steam mop to cool.  
20.When cleaning the steam mop,  
unplug the power cord from the  
electrical outlet and clean with a  
dry or damp cloth. Do not pour  
water or use alcohol, benzene or  
paint thinner on the unit.  
 
This manual covers model number: S3901WM 11  
TECHNICAL SPECIFICATIONS  
Voltage:  
Power:  
Water  
120V., 60Hz.  
1550 Watts  
Capacity: 300ml (10.14 oz.)  
TOLL FREE: 1-800-798-7398  
 
English  
Contents  
Getting Started......................................................................2  
Using Your Steam Mop .......................................................5  
Using Your Carpet Glider...................................................9  
Care of Your Steam Mop....................................................10  
Troubleshooting Guide .......................................................12  
Warranty...................................................................................13  
Thank you for  
purchasing  
the Shark®  
Lift-AwayPro  
Steam Pocket®  
Mop.  
1
 
Getting Started  
When assembling your steam mop there  
may be a little water in or around the  
water tank. This is because we test all  
our steam mops 100% before you buy  
them, so you get a quality Shark®  
l
m
Lift-AwayPro Steam Pocket® Mop.  
c
b
a
n
d
f
o
p
r
s
g
e
q
t
j
h
i
k
a Handheld Steamer  
b Steam Mop Housing  
c Mop Handle  
l
Quick Release Swivel Cord Wrap  
m Cord Clips  
n Steam Unit Lock Button  
o Steam Trigger  
d All-Purpose Mop Head  
e Two-Sided Micro-Fiber Cleaning Pad  
p Handheld Steamer Handle  
q Water Tank Cap (not shown)  
r ON/Standby Button  
s Water Tank  
for the All-Purpose Mop Head (2)  
f
Direct Steam Nozzle  
g Garment Steamer and Bristle Frame  
h (1) 6mm x 54mm Large Screw*  
i
j
Garment Steamer Bonnets  
Carpet Glider  
t Mop Head Release Button  
*Phillips or flat head screwdriver can  
be used. Screwdriver not included.  
k Filling Flask  
2
TOLL FREE: 1-800-798-7398  
 
English  
Getting Started with Your Steam Mop  
fig. 1  
fig. 2  
STEAM MOP ASSEMBLY  
IMPORTANT: Always make sure  
the mop is UNPLUGGED from the  
wall when not in use. Never fill the  
mop, attach the mop head, change  
or remove the micro-fiber cleaning  
pad when the mop is plugged  
1
Insert the Mop Handle end labeled  
Front” into the Steam Mop Housing.  
Make sure it is inserted past the  
line printed on the pole. Secure the  
assembled handle and pole by using  
the large screw and a Phillips or a flat  
head screw driver (screwdriver not  
included). (fig. 1)  
into the wall. To prolong the life of  
your Shark® Lift-AwayPro Steam  
Pocket® Mop we recommend using  
distilled water. Make sure you only  
add water to the tank. Chemicals or  
cleaning solution may damage the  
appliance and could be unsafe for  
you and your family.  
2
Insert the Handheld Steamer into the  
steam mop housing. (fig. 2)  
3
 
Getting Started with Your Steam Mop - cont’d  
fig. 5  
fig. 3  
fig. 6  
fig. 4  
IMPORTANT: Do not use on unsealed  
wood or unglazed ceramic floors.  
On surfaces that have been treated  
with wax or some no wax floors,  
the sheen may be removed by  
the heat and steam action. It is  
always recommended to test an  
isolated area of the surface to be  
cleaned before proceeding. We  
recommend that you check the use  
and care instructions from the floor  
manufacturer.  
3
Use the lavender loop on the side of  
the micro-fiber cleaning pad to slide  
the mop head into the pad pocket.  
Then secure the quick fasteners on  
the top of the pocket to lock in place.  
(fig. 3)  
4
5
Snap the mop head into the base to  
secure it. (fig. 4)  
Turn the water tank cap counter  
clockwise and remove from the tank.  
(fig. 5)  
Use the filling flask and pour water  
into the tank. Do not overfill. Replace  
the cap on the water tank. (fig. 6)  
NOTE: To prolong the life of your  
steam mop, we recommend using  
distilled water.  
4
TOLL FREE: 1-800-798-7398  
 
English  
Using Your Steam Mop  
IMPORTANT: When you are using the  
mop for the first time, it might take  
longer than the normal 30 seconds  
to start steaming.  
fig. 8  
fig. 7  
IMPORTANT: Your Steam Mop needs  
water to make steam! Never use your  
steam mop without water in the tank  
or without the micro-fiber pad  
attached to the head.  
1
Pull and twist the quick release cord  
holder to unwrap the power cord  
completely. Plug into a 120-volt  
electrical outlet. (fig. 7)  
2
The ON/STANDBY button will flash  
blue. If the light does not turn on,  
reference the troubleshooting section  
on page 14. (fig. 8)  
Sweep or vacuum your floors prior to  
cleaning with your Steam Mop.  
Visit www.sharkclean.com for other  
great quick cleaning products to  
complement your Steam Mop, such  
as the Shark® Navigator™ Lift-Away™  
(model NV350WM).  
5
 
Using Your Steam Mop - cont’d  
fig. 10  
fig. 9  
fig. 11  
SELECTING YOUR STEAM SETTING  
3
Press the ON/STANDBY button  
once for DUST setting (DUST lighted  
setting indicator will illuminate). DUST  
To better understand which steam  
setting to use for your cleaning task,  
turn to page 7.  
setting is a light steam for a quick  
dusting and best dry time. (fig. 9)  
4
Clean your floors with a forward and  
backward motion. (fig. 11)  
Press the ON/STANDBY button  
a second time to activate the  
MOP setting. MOP setting is for  
normal, everyday steam cleaning.  
(fig. 10)  
Press the ON/STANDBY button until  
the light flashes to stop the steam.  
NOTE: When using your Shark®  
Lift-AwayPro Steam Pocket® Mop  
in Mop Mode be careful not to press  
the steam trigger on the Handheld  
Steamer, as it will activate STANDBY  
mode. If this happens, press the  
ON/STANDBY button one time to  
reactivate steam.  
Press the ON/STANDBY button  
a third time to activate the SCRUB  
setting. SCRUB setting is for heavy  
cleaning and will leave floors damp.  
6
TOLL FREE: 1-800-798-7398  
 
English  
The Shark® Lift-AwayPro Steam Pocket® Mop has three unique steam  
settings so you can use the perfect amount of steam for the cleaning  
task at hand. See below for tips on when to use each setting.  
Setting  
DUST  
Ideal for These Surfaces  
Recommended Usage  
Laminate  
Bamboo  
Hardwood  
Marble  
Light cleaning and dusting  
Loosen and lift light dirt  
Sanitize floors  
Basic, everyday cleaning  
Hardwood  
Marble  
Tile  
Remove spots and smaller messes  
MOP  
Clean moderate and heavily-  
trafficked areas  
Stone  
Sanitize floors  
Hardwood*  
Tile  
Tough cleaning and removal of  
stuck-on messes and stains  
Deep clean heavily-trafficked areas  
Cut through heavy dirt and grime  
Sanitize floors  
Stone  
SCRUB  
Linoleum  
Carpet  
Freshen area rugs and carpets  
(with Carpet Glider)  
* Scrub mode not recommended for continuous cleaning on hardwood  
7
 
Using Your Steam Mop - cont’d  
6
When the water tank is empty, the  
steam mop will stop producing  
steam. You can refill the water tank  
at any time as long as the mop is  
unplugged from the outlet. Follow  
the instructions from page 4. This  
applies to switching the mop heads  
or micro-fiber cleaning pad as well.  
fig. 12  
NOTE: Please wait 2-3 minutes for  
the Steam Mop to cool off before  
switching the mop head or the  
micro-fiber cleaning pad. Never  
leave the steam mop with a damp/  
wet micro-fiber cleaning pad on  
any floor.  
5
When one side of the micro-fiber  
cleaning pad gets dirty, just flip  
the mop to use the other side and  
continue cleaning with a fresh pad.  
(fig. 12)  
Using Your Carpet Glider  
The Steam Mop won’t clean your  
carpeting or area rugs. However, it’s  
great for grooming and freshening.  
fig. 13  
fig. 14  
THE CARPET GLIDER  
2
Move the steam mop back and forth  
across a section of the carpet.  
(fig. 14)  
1
The Carpet Glider can be used with  
the All-Purpose Head to lightly steam  
your carpet and area rugs. Just  
place the mop head with micro-fiber  
cleaning pad attached into the glider.  
The recommended steam setting is  
SCRUB when using the Carpet Glider.  
(fig. 13)  
8
TOLL FREE: 1-800-798-7398  
 
English  
Getting Started With Your  
Handheld Steamer  
Your Shark® Lift-AwayPro  
Steam Pocket® Mop is designed to clean  
surfaces that will withstand high heat  
and moisture. Do not use on unsealed  
wood surfaces (especially wooden  
antique furniture), unglazed ceramic  
tile, painted surfaces or surfaces that  
have been treated with wax, oils,  
varnishes, or shellac. The sheen may be  
removed by the heat, steam, and friction  
of the cleaning tools. Lacquer and  
polyurethane coatings provide a hard  
durable protective finish that withstands  
moisture, but it is always recommended  
to test an isolated area of the surface to  
be cleaned before proceeding.  
fig. 15  
We also recommend you check the use  
and care instructions from the surface  
manufacturer.  
When cleaning finished wood surfaces,  
use broad, continuous cleaning strokes.  
To prevent surface damage, avoid  
focusing steam or allowing the cleaning  
tools to sit in one spot for any amount  
of time.  
When assembling your Shark®  
Lift-AwayPro Steam Pocket®, there  
may be a little water in the water tank.  
This is because we test all our cleaning  
systems 100% before you buy them, so  
you get a quality Shark® Steam product.  
IMPORTANT: Before removing the  
Handheld Steamer from the steam  
mop housing, make sure that the unit  
is not actively steaming. The ON/  
STANDBY button should be flashing  
blue. If the ON/STANDBY button is  
solid blue, then press the button until  
it returns to flashing blue.  
NOTE: While the Shark® Lift-Away™  
Pro Steam Pocket® Mop will operate  
in one of three steam meetings in the  
mop mode, your Handheld Steamer  
is programmed to function on just  
one steam setting. This setting  
1
To remove the Handheld Steamer,  
press and hold down the steam unit  
lock buttons while pulling out the  
Handheld Steamer. (fig. 15)  
is optimized for above-the-floor  
cleaning and garment steaming.  
9
 
Using Your Handheld Steamer  
with Direct Steam Nozzle  
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean and  
sanitize hard to reach nooks & crannies and other places where germs may build  
up. Use the Direct Steam nozzle to loosen and dislodge compact dirt often found  
in corners and tight places where traditional methods and cleaning tools tend to  
push dirt into, making it tough to reach and clean. Spray direct steam and wipe  
clean with a wet cloth or paper towel.  
fig. 17  
fig. 16  
2
3
To activate steam, first attach the  
Direct Steam Nozzle to the Handheld  
Steamer by snapping the Direct  
Steam Nozzle into the main nozzle.  
(fig. 16)  
CAUTION: Do not press steam  
trigger until the Direct Steam Nozzle  
is snapped into the main nozzle of  
your Handheld Steamer.  
4
To remove the Direct Steam Nozzle,  
press and hold down the steam unit  
lock buttons. Then slide out the  
Then press and hold the steam  
trigger button to start steaming.  
While the steam trigger button is  
pressed and held down, the  
ON/STANDBY button light will be  
solid blue. When released, the  
ON/STANDBY button light will return  
to flashing blue. (fig. 17)  
Direct Steam Nozzle using the grips.  
CAUTION: Do not press steam  
trigger while removing the Direct  
Steam Nozzle. Avoid touching the tip  
of the Direct Steam Nozzle, as this  
will be very hot after steaming.  
10  
TOLL FREE: 1-800-798-7398  
 
English  
Using Your Handheld Steamer  
with Garment Steamer  
Cleaning Tip: The Garment Steamer is ideal for removing wrinkles from clothing and  
freshening and grooming upholstery. A terry bonnet and frame with bristles provides  
controlled steaming for most types of clothing. A specialized micro-fiber bonnet is  
ideal for freshening couches and other upholstery, where odors may accumulate.  
fig. 18  
fig. 20  
fig. 19  
3
Snap the frame with bristles over the  
Garment Steamer. For ease of use,  
we recommend that the bristles be  
placed at the top of the Garment  
Steamer bonnet. (fig. 18)  
4
5
Attach the assembled Garment  
Steamer to the Handheld Steamer  
by snapping it into the main nozzle.  
(fig. 19)  
CAUTION: Always determine color  
fastness of any fabric, especially with  
reds or blues. Taking a clean, moist,  
warm towel and gently rubbing a  
small area on the fabric that is as  
out of sight and out of the way as  
possible. If color bleeds onto the  
towel, you may need to have the  
piece professionally cleaned.  
Press and hold the steam trigger  
button, and move slowly up and  
down over your garments or  
upholstery. While the steam trigger  
button is pressed and held down, the  
ON/STANDBY button light will be  
solid blue. When released, the ON/  
STANDBY button light will return to  
flashing blue. (fig. 20)  
1
Select either the thinner, terry cloth  
bonnet to steam your garments,  
or the thicker, shaggier bonnet to  
freshen upholstery.  
CAUTION: Do not press steam  
trigger while attaching or removing  
the Garment Steamer.  
2
Use the lavender loop on the side of  
the bonnet to slide over the nozzle  
opening of the Garment Steamer.  
The elastic around the bonnet should  
hold it firmly in place around the  
Garment Steamer opening. (fig. 18)  
6
To remove the Garment Steamer,  
press and hold down the steam unit  
lock buttons. Then slide out the  
Garment Steamer using the grips on  
either side of the Steamer.  
11  
 
Care of Your Steam Mop  
fig. 22  
fig. 21  
fig. 23  
fig. 24  
AFTER USE AND STORAGE  
1
When you have finished using the  
Handheld Steamer, reattach it to the  
mop by first placing the bottom of  
the Handheld Steamer into the cradle  
of the mop housing. (fig. 21)  
Remove the micro-fiber cleaning pad  
by releasing the quick fasteners and  
using the lavender loop on the side  
of the pocket, avoiding contact with  
the hot pad. (fig. 22)  
2
Then slide the top end of the  
Handheld Steamer into the mop  
housing and snap into place.  
4
5
Empty the water tank before  
storage. Remove the water tank cap  
and empty the tank over a sink.  
Replace the water cap. (fig. 23)  
NOTE: Make sure all attachments  
are removed before reuniting the  
Handheld Steamer with the  
steam mop.  
To store the Shark® Lift-AwayPro  
Steam Pocket® Mop hanging up, first  
remove the head (after it has cooled  
and the steam has been released)  
then hang on a large hook. (fig. 24)  
3
If you are also done mopping, press  
the ON/STANDBY button until the  
LED light turns flashing blue. This  
stops the unit from steaming. Unplug  
the cord from the outlet and place the  
mop into the upright position. Let the  
unit cool for 2-3 minutes.  
12  
TOLL FREE: 1-800-798-7398  
 
English  
Cleaning Tip: To prevent clogging,  
it is recommended that you  
periodically clean the Direct  
Steam Nozzle and the extension  
hose stem with the cleaning tool  
provided or a paper clip.  
CLEANING TOOL GOES HERE  
fig.25  
fig.26  
fig.27  
CARE OF YOUR MICRO-FIBER  
CLEANING PAD  
CLEANING THE NOZZLE  
1
Your Handheld Steamer should not  
normally require cleaning, however,  
should you notice a decrease in the  
steam output, it may be necessary  
to remove mineral deposits built up  
around the nozzles.  
1
We recommend washing your  
micro-fiber cleaning pads separately  
from other fabrics to avoid picking  
up lint. Only use liquid detergent  
(no powder detergent). Do not use  
any fabric softeners or bleach. Line  
dry or dry on a low dryer setting.  
(fig. 25)  
2
3
Unplug the cleaner from the  
electrical outlet.  
Use the provided nozzle cleaner or a  
small diameter stiff metal wire, such  
as a straightened metal paperclip,  
and carefully insert the end of the  
wire into the nozzle orifice. See  
illustration above. (fig. 27)  
2
If there are loose threads on the  
micro-fiber cleaning pad carefully  
cut the thread with scissors. Don’t  
pull on them or cut at the base.  
(fig. 26)  
IMPORTANT: The micro-fiber  
cleaning pad may be very hot  
from the steam. Use caution when  
removing. Let the unit cool for 2-3  
minutes.  
4 Move the wire back and forth several  
times to remove any deposits.  
5
Plug in the appliance to the power  
outlet and test steam output.  
13  
 
Troubleshooting Guide  
PROBLEM  
POSSIBLE REASONS & SOLUTIONS  
Your steam mop should be securely plugged into a  
120V AC electrical outlet only.  
The Shark® Lift-Away™  
Pro Steam Pocket®  
Mop will not turn-on.  
Check your fuse or breaker.  
If your unit still does not work, call 1-800-798-7398.  
Is there water in the water tank? If not, add water to your steam  
mop following instructions on page 4.  
The unit will not  
make steam.  
If the unit still does not make steam, follow the instructions on  
page 13 to clean the nozzle.  
If you have already plugged in your unit, unplug and try a  
different outlet. This may reset the standby mode.  
Cannot select steam  
setting/flashing blue  
light remains on.  
Add water to the tank and select steam setting by pressing the  
standby button.  
If your unit still does not work, call Customer care at  
1-800-798-7398.  
The Shark® Lift-Away™  
Pro Steam Pocket®  
Mop leaves water  
on the floor.  
Check to see if your micro-fiber cleaning pad is too wet. We  
recommend you unplug the steam mop and change the  
micro-fiber cleaning pad.  
Make sure the micro-fiber cleaning pad is attached correctly.  
Do not leave your steam mop on the floor with a damp or  
wet cleaning pad.  
The Shark® Lift-Away™  
Pro Steam Pocket®  
Mop left a white spot  
on the floor.  
If you’re using tap water we recommend switching  
to distilled water.  
Make sure the cap is securely on the water tank.  
The micro-fiber cleaning pad might be dirty. Flip or change the  
cleaning pad.  
If you washed the cleaning pad with powder detergent, then it  
might be ruined. Replacement pads are available at  
sharkclean.com.  
Floors are cloudy,  
streaky or spotty  
after steaming.  
This could also be an indication of prior soap or grease residue  
that has accumulated on the floor. As our steam mops use only  
a small amount of water, it may not be wet enough to rinse off  
the accumulation that the steam is bringing to the surface. We  
suggest rinsing the floor with nothing but water, letting it dry,  
and then steam mopping again with a clean pad. One or more  
rinses generally removes the residue.  
A more stubborn case may require you to rinse the floor with a  
mix of one part vinegar and two parts water.  
The Shark® Lift-Away™  
Pro Steam Pocket®  
Mop is hard to push.  
Make sure the micro-fiber cleaning pad is attached correctly.  
Check to see if the cleaning pad is excessively dirty. Replace if  
the cleaning pad is too dirty or wet.  
The small steam bonnet frame must be in place at all times  
during usage. The bonnet prevents water drops from being left  
on the garment and removes impurities from your water.  
The nozzle leaves  
water drops on  
the garment.  
If the steam bonnet is too wet or the frame has condensation,  
let the unit cool for 30 minutes, remove the steam bonnet and  
let it dry out before using again, or replace with a new  
steam bonnet.  
14  
TOLL FREE: 1-800-798-7398  
 
English  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of the original purchase, when utilized for  
normal household use, subject to the following conditions, exclusions and exceptions.  
If your appliance fails to operate properly while in use under normal household conditions  
within the warranty period, return the complete appliance and accessories, freight prepaid. For  
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC  
will repair or replace it free of charge. Proof of purchase date and $ 14.95 to cover the cost of  
return shipping and handling must be included. *  
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or  
replacement of the unit at our option. This warranty does not cover normal wear of parts and  
does not apply to any unit that has been tampered with or used for commercial purposes. This  
limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage  
due to faulty packaging or mishandling in transit. This warranty does not cover damage or  
defects caused by or resulting from damages from shipping or repairs, service or alterations to  
the product or any of its parts, which have been performed by a repair person not authorized by  
EURO-PRO Operating LLC.  
This warranty is extended to the original purchaser of the unit and excludes all other legal and/  
or conventional warranties. The responsibility of EURO-PRO Operating LLC warranty if any,  
is limited to the specific obligations expressly assumed by it under the terms of the limited  
warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential  
damages of any nature whatsoever. Some states/provinces do not permit the exclusion or  
limitation of incidental or consequential damages, so the above may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state or province to province.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  
purchase date and to attach tag to item before packing with your name, complete address and  
phone number with a note giving purchase information, model number and what you believe  
is the problem with the item. We recommend you insure the package (as damage in shipping  
is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER  
SERVICE”. We are constantly striving to improve our products, therefore the specifications  
contained herein are subject to change without notice.  
OWNERSHIP REGISTRATION CARD FOR  
CANADIAN CONSUMERS ONLY  
Please complete and return within ten (10) days of purchase. The registration will enable  
us to contact you in the event a product defect is discovered. By returning this card you  
acknowledge to have read and understood the instructions for use, and warnings set  
forth in the accompanying instructions.  
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec H4S 1A7  
PURCHASER: ……………………………………………………………………………………............................………............  
ADDRESS: ………………………………………………………………………………………………...........................................  
S3901WM 11  
DATE OF PURCHASE: ………………….........….. MODEL: ……………….....................................................  
NAME AND ADDRESS OF STORE: …………………………………...........................………………………………..  
15  
 
U.S.:  
EURO-PRO Operating LLC  
Newton, MA 02459  
Canada: EURO-PRO Operating LLC  
4400 Bois Franc  
Ville St. Laurent, Québec H4S 1A7  
1-800-798-7398  
COPYRIGHT© EURO-PRO OPERATING LLC 2011  
PRINTED IN CHINA  
S3901WM.E.110420  
Illustrations may differ from actual product.  
US Patent Nos. 7669280, 7600401, D611214, D626711,  
D599518, D599517  
 

Sharp Car Video System N 80TC3 User Manual
SMSC Switch USB2524 User Manual
Socket Mobile PDAs Smartphones SoMo 650 User Manual
Sony Camcorder Accessories SPK IP55 User Manual
Sony Microcassette Recorder 4 114 026 111 User Manual
Sony Portable CD Player CFD 222L User Manual
Sony Projection Television KP 44DX2 User Manual
SRS Labs Musical Instrument Amplifier SR550 552 User Manual
StarTechcom Computer Drive PEXUSB3S24 User Manual
Sun Microsystems Power Supply 2000E User Manual