Sony MiniDisc Player MZ E700 User Manual

En g lish  
3-220-300-12(1)  
C
4
Press RPT/ ENT on the remote control.  
The sound settings are stored and the playback display  
appears again.  
BOt h e r d isc o p e ra t io n  
WARNING  
A
To p re ve n t fire o r sh o ck h a za rd , d o n o t  
e xp o se t h e u n it t o ra in o r m o ist u re .  
To  
Do this (Beeps in the headphones/  
earphones)  
To se le ct a p re se t so u n d  
Press SOUND on the remote control repeatedly to select  
“SOUND1,” “SOUND2,” or no display.  
Selecting no display turns off the Digital Sound Preset function.  
Stop  
Press x. (A Long beep)  
To a vo id e le ct rica l sh o ck, d o n o t o p e n t h e  
ca b in e t . Re fe r se rvicin g t o q u a lifie d  
p e rso n n e l o n ly.  
Po rt a b le Min iDisc  
Pla ye r  
Pause  
Press X on the remote control.  
(Continuous short beeps)  
Dig it a l So u n d Pre se t fa ct o ry se t t in g s  
The Digital Sound Preset Factory settings are as follows:  
Press X on the remote control again to  
resume playback.1)  
Ca u t io n  
B
C
“SOUND1”: bass +1, treble ±0  
“SOUND2”: bass +3, treble ±0  
The use of optical instruments with this product will increase  
eye hazard.  
Find the beginning  
of the current track  
Turn the control towards . on the  
remote control. (Three short beeps)  
Press . on the player once.  
Operating instructions  
Tips  
CAUTION — INVISIBLE LASER RADIATION WHEN OPEN  
(XXXTraditional Chinese)  
The settings can be stored to the Personal Disc Memory.  
Listen to the beginning  
of the previous track  
Turn the control towards .on the  
remote control repeatedly. (Continuous  
three short beeps)  
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH  
OPTICAL INSTRUMENTS  
Settings can be changed while playback is momentarily paused.  
Notes  
In fo rm a t io n  
Settings cannot be changed through the operation buttons on the  
Press . on the player repeatedly.  
player.  
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY  
NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY  
DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.  
Listen to the  
beginning of the  
next track  
Turn the control towards N> on the  
remote control. (Two short beeps)  
Press >/ N on the player once.  
When you use the Digital Sound Preset, the sound may break or  
become distorted when the volume is turned up too high, depending  
on the settings.  
Go backwards  
while playing1)  
Turn and hold the control towards .  
on the remote control.  
Hold down . on the player.  
VOL+  
2
Certain countries may regulate disposal of the battery used to power this  
product.  
Please consult with your local authority.  
To ch a n g e p la yb a ck sp e e d (Sp e e d  
Co n t ro l)(Se e Fig .F)  
.
VOL–  
Go forward  
x
Turn and hold the control towards  
N> on the remote control.  
Hold down >/ N on the player.  
>/N  
while playing1)  
VOLUME  
+/–  
“WALKMAN” is a trademark of Sony  
Corporation.  
The variable playback function is convenient for such uses as  
language study.  
You can adjust the speed in seven steps.  
1N>  
BGe t t in g st a rt e d  
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX  
Remove the MD  
MZ-E700  
Press x, and then slide OPEN.2)  
X
.
1)  
Pre p a rin g a p o w e r so u rce  
1
2
Press DISPLAY on the remote control for 2 seconds or more  
during playback.(See Fig. D-A)  
When you press . or >/ N on the player during pause, the  
player resumes playback.  
Sony Corporation © 2000 Printed in Japan  
x
OPR lamp  
XXXX  
If you turn and hold the control towards . or N> on the remote  
control (or hold down . or >/ N on the player) during pause,  
you can fast forward/ rewind without listening to the playback sound.  
Once you open the lid, the point to start playback changes to the  
beginning of the first track.  
Usin g o n t h e re ch a rg e a b le b a t t e ry  
Turn the control on the remote control towards . or  
N> until “SPEED” flashes in the display, and then press  
x on the remote control.  
Charge the supplied rechargeable battery before using it for the  
first time.  
2)  
The player changes to speed-setting mode.  
D
1
Charge the supplied rechargeable battery NH-14WM with  
the supplied battery charger.(See Fig. A-A)  
Note  
3
Turn the control towards . or N> to select the  
playback speed.  
A
When removing the disc, make sure to press x first, and then slide  
OPEN.  
A
Hong Kong model  
“+” shows the normal speed and the cursor shows the  
playback speed you are selecting.(See Fig. F-A)  
Full charging takes about 1.5 hours.  
World model and other models  
Full charging takes about 2 hours.  
About the G-PROTECTION function  
A
PLAYMODE  
DISPLAY  
RPT/ENT  
The G-PROTECTION function has been developed to provide excellent  
protection against sound skipping during many active uses. This  
function provides a higher level of shock protection during playback than  
the traditional one.  
4
Press x to set the playback speed.  
During playback speeds other than normal, “S” appears to  
the right of the elapsed time.(See Fig. F-B)  
• Hong Kong model  
• XXXXXXXXXXXXXXXXX  
SOUND  
2
Open the rechargeable battery compartment lid and insert  
the charged battery with correct polarity.(See Fig. A-B)  
You can charge the battery about 300 times.  
to a w all outlet  
XXXXXXXXXXX  
lamp  
XXXX  
Tip  
Tips  
The settings can be stored to the Personal Disc Memory.  
The player can play the track recorded by double or 4 times long mode  
(LP2 or LP4). Normal stereo playback, LP2 stereo playback, LP4 stereo  
playback or monaural playback is automatically selected to match the  
audio source.  
Usin g o n a d ry b a t t e ry (Se e Fig . A-C)  
Notes  
Settings cannot be changed through the operation buttons on the  
HOLD  
Attach the supplied battery case to the player, and then insert  
one LR6 (size AA) battery with correct polarity. Be sure to insert  
the battery (minus) end first.  
player.  
./N >  
VOL +/–  
During the operation of the unit, the OPR lamp on the player turns on.  
After you press x to stop the playback, the OPR lamp turns off.  
The display on the remote control will turn off shortly after you press  
x.  
The playback sound will be affected by the playback speed.  
All settings will be lost when you remove the disc from the player.  
x
Wh e n t o re p la ce o r re ch a rg e t h e b a t t e ry  
St o rin g t h e se t t in g s fo r in d ivid u a l d iscs  
(Pe rso n a l Disc Me m o ry)  
B
Note  
Sound may skip if:  
— the player receives stronger continuous shock than expected.  
— a dirty or scratched MiniDisc is played.  
• World model and other models  
• XXXXXXXXXXXXXXXXXXX  
You can check the battery condition with the battery indication  
on the remote control while using the player.  
lamp  
XXXX  
to a w all outlet  
XXXXXXXXXXX  
XXXXXXXXX  
Settings can be memorized for a disc. Once memorized, the  
settings are recalled and applied whenever the disc is inserted.  
The following settings can be stored:  
t
v
Battery power decreasing  
Track number  
XXXXXXXXX  
Program number  
XXXXXXXXXX  
r
v
Weak batteries  
BVa rio u s w a ys o f p la yb a ck  
Volume  
Play mode  
Program setting  
Sound quality (Digital Sound Preset)  
Playback speed (Speed control)  
,
e
The batteries have gone out. “LOW BATT” flashes in the display  
on the remote control, and the power goes off.  
Ch a n g in g t h e p la y m o d e (Se e Fig .D)  
Battery life  
(EIAJ1))  
You can select from various play modes using the PLAYMODE  
and RPT/ ENT on the remote control.  
E
Batteries  
Stereo (normal) LP2 Stereo LP4 Stereo  
1
2
Press DISPLAY on the remote control for 2 seconds or more.  
(See Fig. D-A)  
Ni-MH rechargeable  
battery  
29  
33  
37  
A
Se le ct in g t h e p la y m o d e (Se e Fig .D-A)  
NH-14WM2)  
Turn the control on the remote control towards . or  
N> until “PERSONAL” flashes in the display, and then  
press x on the remote control.  
B
LR6 (SG) Sony  
42  
76  
49  
87  
58  
1
Press PLAYMODE repeatedly to select one of the four play  
modes, as follows.  
Alkaline dry battery3)  
“Entry?” flashes in the display.  
e
LR6 (SG)3) and  
NH-14WM2)  
100  
3
Press x on the remote control.  
“Entry OK” appears in the display and the disc settings are  
stored in the player.  
When you select bass-setting mode, “Bappears. When you  
select treble-setting mode, “Tappears.  
Display  
Play mode  
E
(none) (normal play)  
All the tracks are played once.  
A single track is played once.  
(Unit: Approx. hours)  
XXXXXXXXXXXXXXXXX  
XXXXXXXXXXXXXXXXXX  
1)  
Measured in accordance with the EIAJ (Electronic Industries  
Association of Japan) standard (using a Sony MDW-series Mini-disc).  
With a fully charged battery  
When using a Sony LR6 (SG) “STAMINA” alkaline dry battery  
(produced in Japan).  
1” (single play)  
b
b
To Era se t h e d isc in fo rm a t io n  
2)  
3)  
SHUF” (shuffle play)  
Insert the disc whose information is to be erased and verify its  
contents. Do steps 1 and 2 until “Erase?” flashes in the display,  
and then press x. “Erase OK” appears in the display and the  
disc information is erased.  
All the tracks are played in random  
order.  
B
PGM” (program play)  
Tracks are played in the order that  
you specified.  
Note  
If you try to erase the disc information of a disc that has never  
been stored, “No Entry!appears in the display for 2 seconds.  
The battery life may be shorter depending on operating conditions, the  
surrounding temperature, and the battery type.  
Example: While adjusting the bass,  
the cursor moves. (Position: –2)  
XXXXX: XXXXXXXXXXX  
XXXXXXXXXX  
C
List e n in g t o t ra cks in a d e sire d se q u e n ce  
(Pro g ra m p la y)  
Notes  
Settings can be stored for up to 20 discs. Any settings stored thereafter  
will replace the settings for the MD with the oldest playback date.  
If you use another minidisc recorder to edit or add tracks to a disc  
whose settings have been stored on the player, the disc will no longer  
be recognizable by the player and the stored information will become  
useless.  
Usin g o n h o u se cu rre n t (Se e Fig .A-D)  
1
2
Attach the supplied battery case to the player.  
If the rechargeable battery is inserted in the player, remove it.  
1
2
3
4
5
Press PLAYMODE repeatedly until “PGM” flashes in the  
display.  
2
–4  
±0  
+3  
1
Connect the optional AC-E15L AC power adaptor (for use in  
Japan) or the optional AC-E15HG AC power adaptor (for  
use outside of Japan) to the DC IN 1.5V jack of the battery  
case.  
The sound can be adjusted in eight steps, from –4 to +3.  
XXXXXXXXXXXXXXXXXXX.  
Turn the control towards . or N> repeatedly to select  
a track. (See Fig. D-B)  
To kn o w t h e t ra ck n a m e a n d p la yin g  
t im e (Se e Fig .G)  
Press RPT/ ENT.  
The track is entered.  
m
3
Connect the AC power adaptor to a wall outlet.  
F
Repeat steps 2 and 3 to select other tracks in the desired  
sequence.  
Notes  
• Do not use any other AC power adaptor. Specifications for AC-E15HG  
During playback, you can check the track name and track  
number, the elapsed time of the current track, and the total  
number of tracks on the MD.  
3
4
A
AC power adaptor vary in each region. Check the voltage and the  
shape of the plug before purchasing.  
Press RPT/ ENT for 2 seconds or more.  
The settings are entered and playback starts from the first  
programmed track.  
1
Press DISPLAY on the remote control while the player is  
playing an MD.  
Example: When the playback speed is 95% of the original  
speed, “–” and the cursor w ill flash alternately.  
Each time you press DISPLAY, the display changes the  
Tips  
XXXXXX: XXXXXXXXXXXXXXXX  
XXXXXXXXXXXXXXX.  
indications as the followings (See Fig. ):  
G
The program play settings will remain in memory even after playback  
Polarity of the plug  
finishes or is stopped.  
A
B
You can set the program play up to 20 tracks.  
The settings can be stored to the Personal Disc Memory.  
to a w all outlet  
XXXXX  
XXXXXXX  
D
The battery indication mark is displayed while using the AC power  
adaptor.  
Track number  
Track number  
The number of total tracks  
Track number  
1)  
The elapsed time  
Track name1)  
Disc name1)  
Notes  
80% 100% 110%  
All program settings are lost when the disc is removed from the player.  
The playing speed can be set at 80% to 110% normal speed,  
in seven steps of 5% each.  
If no settings are made for five minutes while the player is stopped, the  
settings made up to that point are entered.  
Track mode2)  
To co n n e ct t h e h e a d p h o n e s/  
e a rp h o n e s (Se e Fig .B)  
XXXXXXXXXXXX  
XXXXXXXXXXXXXXX  
Re p e a t p la y  
Appears only with MDs that have been electronically labeled.  
The mode for each track is indicated as follows:  
2)  
1
Connect the supplied headphones/ earphones to the remote  
control.  
You can use this function to repeat playback in normal play,  
single play, shuffle play, or program play mode.  
“Mode : SP”  
Standard mode (stereo)  
B
to DC IN 1.5V jack  
XXXXXXXX  
“Mode : LP2”  
“Mode : LP4”  
“Mode : MONO”  
2 × mode (2 × normal playing time)  
4 × mode (4 × normal playing time)  
Monaural  
Connect the remote control to i jack of the player.  
Slide HOLD on the remote control and the player to the  
direction of the arrows shown in the illustration.  
1
Press RPT/ ENT during playback.  
” appears in the display.  
Note  
The mode indication appears only during playback. The mode appears  
for 2 seconds. It is then replaced by the elapsed time of the current track.  
BMD p la yin g  
G
To a d ju st t h e so u n d q u a lit y (Dig it a l  
B
So u n d Pre se t )(Se e Fig .E)  
A
B
Pla yin g a n MD (Se e Fig .C)  
You can make adjustments to the sound quality to suit your  
taste, and then store two sets of these adjustments.  
Insert the plugs firmly.  
XXXXXXXXXXXXXX  
1
Insert an MD.  
1
2
Slide OPEN. (See Fig. C-A)  
Insert the MD with the label side facing up, and press  
1
2
Press SOUND on the remote control repeatedly to select  
“SOUND1” or “SOUND2.” (See Fig. D-A)  
the lid down to close. (See Fig. C-B)  
During playback, press SOUND on the remote control for 2  
seconds or more. (See Fig. E-A)  
2
Play the MD. (See Fig. C-C)  
1
Turn the control towards .or N> on the remote  
control (or press >/ N on the player).  
The player changes to the bass-setting mode. Pressing  
SOUND for 2 seconds again changes the player back to the  
treble-setting mode.  
When using the remote control, a short beep sounds in  
the headphones/ earphones.  
2
Pull and turn VOL +/ – on the remote control (or press  
VOLUME +/ – on the player) to adjust the volume.  
The volume indicator appears on the remote control to  
allow you to check the volume.  
3
Turn the control on the remote control towards . or  
N> repeatedly to adjust the bass or the treble.  
(See Fig.  
)
E-B  
When you press SOUND for more than 2 seconds while  
adjusting the bass, the display switches to the treble (or vice-  
versa).  
HOLD  
HOLD  
When you press SOUND for a short time while adjusting the  
bass or the treble, the setting for that sound is entered and  
the display switches to the other sound setting.  
 

Sharp Microwave Oven R 898 User Manual
Shindaiwa Brush Cutter C254 User Manual
Sony Car Stereo System DCC FMT3 User Manual
Sony DVD Player Model HTP 36DW User Manual
Sony Home Theater System DAV DZ250M User Manual
Sony Portable DVD Player DVP FX970 User Manual
Sony Projection Television KDS 50A2000 User Manual
Sony Stereo Amplifier TA FA1200ES User Manual
Speco Technologies Security Camera CVC 3805TP W User Manual
Stiga Lawn Mower 155 H User Manual