FRONT English
SIZE: 5-1/2 x 8-1/2 in.
101201
Bare Floor Nozzle
Assembly Instructions
LiftAway
1 From the Upright Vac mode, press the release button on the lower side of
the canister and remove the motorized floor brush. Place the bare floor
nozzle on a level floor surface, align the tube of the floor nozzle with the
tube on the detachable canister and click into place. (Fig. 1)
OR
With the canister removed, insert the extension wand and handle directly
onto the bare floor nozzle. (Fig. 2)
2 Press the On/Off switch to the “I” position to turn the suction motor on.
Fig. 1
Fig. 2
Ideal for bare floor cleaning and large and small particle
pick up. Low profile for easy access to any area.
TOLL FREE: 1-800-798-7398
XSN350W
Care Instructions
270.9gsm white offset cover stock
PMS 2592
|